FQ2NG 06
Multifrequency FQ2 series
Digital control of amplitude and frequency, with automatic resonance search for maximum feeding efficiency. The FQ2NG 06 is a professional microprocessor controller that adjusts both vibration amplitude and frequency digitally, optimizing feeder performance even when mechanical tuning isn’t perfect.
Driving linear and medium-sized circular vibrators up to 6 A at 80–260 V, it’s also ideal for feeders tuned to 50 Hz that need to run in 60 Hz markets. With M12 connectors, LCD display of frequency and amplitude, dual PNP sensor inputs, part-flow alarm and air blow, it suits linear, circular, vibrating hopper and elevator systems.
Description
Professional digital microprocessor controller with LCD display of frequency and amplitude – Start or stop delay of the vibrator via PNP sensor or mechanical contact (material presence), adjustable up to 20 seconds – 0–10 V automatic input – Status relay – Second PNP sensor – Air blow – Part-flow alarm – Alarm lamp.
Application: Digital adjustment of amplitude and frequency for linear vibrators and medium-sized circular vibrators up to 6 A – Used to optimize vibrator performance even when mechanical tuning is not perfect – Suitable for vibrators tuned to 50 Hz operating in markets with 60 Hz frequency – Applicable in systems with LINEAR, CIRCULAR, VIBRATING HOPPER, or ELEVATOR.
Available Versions:
| Model | Enclosure | Color | Dimensions | Code |
|---|---|---|---|---|
| FQ2NG-LCD06 | Aluminium | Gray | 100 x 250 x 105 | PV FQ2NG Z2 LCD ST6 |
UL/CSA certification coming soon.
Options
- Customized label
- Connector for vibrator
- Vibrator control with dual track (2 PNP sensors)
- Custom SW
Additional information
| Series | Multifrequency FQ2 NG |
|---|---|
| Enclosure | Aluminum |
| Input Voltage [V] | 80-260 |
| Power Consumption | 2.5 W max |
| Max Output Current [A] | 6 |
| Min Load | 50 mA (RMS) |
| Vibration Frequency [Hz] | 5-140 (up to 300 on request) |
| Soft Start [s] | 0-20 |
| Min/Max Adjustment | 50V ± 30% – 200V – 30% |
| ON/OFF | Dry contact, Voltage signal |
| Blow Delay | 0-2 sec. |
| Sensor Inputs | NO/NC, NPN/PNP, Opto-isolated |
| Overflow Control | PNP1 – PNP2 (0 ÷ 20 sec.) |
| Amplitude Sensor | Sind3 |
| Automatic Input | 0/10V – 0/20 mA |
| Working Temperature | -5 °C / +55 °C |
| Relative Humidity Range | 80% up to 31 °C |
| Altitude | Up to 2000 m |
| Protection Index [IP] | IP55 |
| Standard Conformity | CE, EMC, Rohs |
| Warranty | 24 months (from the date on the board) |
New products
Instruments
Vibration meter — amplitude / acceleration / frequency · 115/230 V
