Controller for a system of two channels like vibratory hopper and vibratory bowl feeder or bowl feeder with linear vibrating feeder with 7 working logic.

General Details

This Module MCP02 can be used for the automatic driving of a system made up by a vibratory hopper with bowl feeder or bowl feeder with linear feeder. It have 4 sensors PNP inputs, output blow air, alarm timeout and counter. It have also 7 different working logics to allow the use of the two vibrating channels in various configurations.

General Characteristics

  • Supply voltage 100V-250V, 50/60 Hz
  • 6 output 24V for : air-jet, presence piece, Counter, Time Out channels and EV ON/OFF.
  • 3 Output status +24V (Power ON – Enable ON), channel status CH1 and CH2.
  • Soft/Fast ramp
  • 2 Enable input 24Vdc or volt-free contacts for each channel.
  • 7 working logics
  • Line input with schuko plug
  • Vibrator output with connector
  • Delay EV air blow (0 ÷ 60 sec.)
  • Time Alarm absence pieces (0 ÷ 180 sec.)
  • Max current : 10A (with 8A max CH1 and 4A max on CH2)


  • Personalized label
  • Connector for vibrator
  • SW custom.


Control circuit for vibratory Hopper and Bowl feeder or Bowl feeder with Linear vibratory feeder in various work configurations.

Available versions

Type Box Colour Dimensions Code
MCP02 Metallic Grey 100 x 180 x 190 PV MCP02 Z2 STD
Supply Voltage 100V-250V +/- 5% 50/60Hz
Current Max 8A (CH1) – 4A (CH2)
Fuses 6,3A F 250V 5×20 H 1500 A (EN 627-2 CEI)
Min. Load 50 mA (RMS)
Frequency of Vibration 3000/6000 V/min. (50Hz)
Time of Ramp 0,2 sec. or 2 sec. (modifiable)
Regolation Min. 80V +/- 30%
Regolation Max 200V – 30%
Delay T1/T2 0-10 sec.
Alarm Time 0-15 sec.
Sensor Input optoisolated NPN/PNP
Degree of pollution 2
Position of Assemblage horizontal or vertical
Degree of Protection IP54 in box (only circuit IP00)
Temperature of Storage -15 °C / + 80 °C
Temperature of Operation -5 °C / + 45 °C
Range of Relative humidity 80% till to 31°C
Installation Class II
Altitude till to 2000 meters
European Norms EMC CE
Guarantee 1 year (from date on circuit)



Per visualizzare i documenti è necessario inserire i vostri dati di accesso forniti da MP Elettronica.
Vai al modulo di richiesta credenziali di accesso.