FQ1NG 16
Multifrequency FQ1 series
Digital control of amplitude and frequency, with automatic resonance search for maximum feeding efficiency. The FQ1NG 16 is a professional microprocessor controller that adjusts both vibration amplitude and frequency digitally, then tunes the feeder to its resonance point – eliminating the long, tricky mechanical calibration of traditional controllers.
Driving heavier electromagnetic vibratory feeders up to 16 A at 80–260 V, it features a frequency and amplitude display, dual PNP sensor inputs, part-flow alarm, air blow and load current limitation. Ideal for larger linear and bowl feeders that need steady, repeatable performance even when mechanical tuning isn’t perfect.
Description
Professional digital microprocessor controller with frequency and amplitude display – Start or stop delay of the vibrator via PNP sensor or mechanical contact (material presence) up to a maximum of 20 seconds, adjustable – 0–10 V automatic input – Status relay – Second PNP sensor – Air blow – Part-flow alarm – Alarm lamp – Load current limitation.
Application: Digital regulation of linear and bowl feeder till 10/16 Amps – Used to optimize the operation of the vibratory feeder by searching for its resonance frequency (max performance) thereby eliminating its lengthy and difficult mechanical calibration – Enable input for multiple electromagnetic system (linear – blow feeder – hopper).
Available Versions:
| Model | Enclosure | Color | Dimensions | Code |
|---|---|---|---|---|
| FQ1NG | Metallic | Gray | 100 x 225 x 210 | PV FQ1NG Z2 16A |
UL/CSA certification coming soon.
Options
- Customized label and SW
- Connector for vibrator
- Dual-track vibrator control (2 PNP sensors)
Additional information
| Series | Multifrequency FQ1 NG |
|---|---|
| Enclosure | Metal |
| Input Voltage [V] | 80-260 |
| Power Consumption | 2.5 W max |
| Max Output Current [A] | 16 |
| Min Load | 50 mA (RMS) |
| Vibration Frequency [Hz] | 5-140 (up to 300 on request) |
| Soft Start [s] | 0-20 |
| Min/Max Adjustment | 50V ± 30% – 200V – 30% |
| ON/OFF | Dry contact, Voltage signal |
| Blow Delay | 0-2 sec. |
| Sensor Inputs | NO/NC, NPN/PNP, Opto-isolated |
| Overflow Control | PNP1 – PNP2 (0 ÷ 20 sec.) |
| Amplitude Sensor | Sind3 |
| Automatic Input | 0/10V – 0/20 mA |
| Working Temperature | -5 °C / +55 °C |
| Relative Humidity Range | 80% up to 31 °C |
| Altitude | Up to 2000 m |
| Protection Index [IP] | IP55 |
| Standard Conformity | CE, EMC, Rohs |
| Warranty | 24 months (from the date on the board) |
New products
Instruments
Vibration meter — amplitude / acceleration / frequency · 115/230 V
