MCP02
Multichannel MCP series
Multichannel control, set from the keypad. The MCP02 digital module runs a full feeding system – vibrating hopper, circular and linear feeder – driving up to two vibrating units with PNP sensors, air-blow output and part-flow alarm, with every parameter set directly from the on-board keypad.
It handles a total current of up to 15 A at 85–260 V with stabilized output, selectable 3000/6000 vpm, ramp time and sensor-controlled ON/OFF delay for hands-off, repeatable automation.
Description
MCP02 is a digital microprocessor module for the automatic operation of a feeding system composed of a vibrating hopper, circular vibrator and linear vibrator, with two PNP sensors, air-blow output and part-flow alarm. All parameters are selectable via the keypad.
Application: Control of vibrating hopper, circular vibrator, or linear vibrator, with PNP level sensor in the circular or linear unit and PNP overflow sensor on the linear unit (both timed), plus air blow for part-flow loss with alarm.
Available Versions:
| Model | Enclosure | Color | Dimensions | Code |
|---|---|---|---|---|
| MCP02 | Metallic | Grey | 100 x 225 x 210 | PV MCP02 Z2 STD |
Options
- Personalized label
- Connector for vibrator
- SW custom
- Modbus (option)
Additional information
| Series | Multichannel MCP |
|---|---|
| Input Voltage [V] | 85-260V – 50/60 Hz |
| Vibration Frequency [Hz] | 50/100, 60/120 |
| Soft Start [s] | 0-10 |
| ON/OFF | 0-24 V, Dry contact |
| Automatic Input PLC | 0-10V/4-20mA |
| Enclosure | Aluminum |
| Protection Index [IP] | IP55 |
| Standard Conformity | CE, EMC, Rohs |
| Warranty | 24 months (from the date on the board) |
| Overflow Control | PNP/24V/Dry Contact |
| Channels | 2 |
Video
New products
Instruments
Vibration meter — amplitude / acceleration / frequency · 115/230 V
